Sunday, June 17, 2012

Front Door Makeover












My front door was pretty sad looking and needed to be painted. I had put it off since we moved into our house nine years ago. I really hated the brass knobs and kick plate - ugh.

As you can see here it really needed an update.


We changed the window out from the standard wagon wheel style when we moved in but never got around to painting the door.

This is a temporary door - pretty bad huh?


 This ugly door my DH found at Re-Store Habitat for Humanity for $25 so that we could take the door down to sand, prime and paint it easier. After we are done we will return it to Re-Store. Great idea Huh? He comes up with some good ones. You can see here the inside is just as ugly as the outside.


Here is where my DH set up in the garage to sand and paint.


Here it is with one coat of paint.



 This is where it went wrong. My DH decided it would be easier with the door vertical so he brought it outside. This would have been OK except the wind was blowing and the cotton was flying - not to mention he used oil based paint.


Back to that later. Here is the door reinstalled (inside) I have sanded wiped it down and taped it.

I hate to paint with oil based paint so I went to Kwal Howells and asked the guy there. He recommended this water based acrylic enamel in a semigloss finish.


I rolled it on with a foam roller to get a ultra smooth finish.
It took 3 coats but looks fabulous - Love it!




Inside done, now back to the outside. It was bad,  I didn't get pictures but the finish was all bumpy and when the sun hit it, it looked even worse. So my DH sanded it down, then I sanded it some more and finally it was ready to paint again.

I waited for a nice day when the front door could stay open while drying. My DH took the knob and deadbolt off (I purchased new ones for all the exterior doors so they will all match - eventually) and then I got to work.
It took three coats as well.

I wanted to keep this hook on the front of the door for my wreaths but it was that ugly brass, so I sprayed it with dark bronze rustolium. Using a shipping box to do my spraying, I stuck the screws into it for easier painting.




Once dry I reinstalled it and added a new kick plate in dark bronze the same color
as the new hardware I purchased - Now it's looking good.


Now for the finishing touches - I added vinyl house numbers
I purchased Here for $10 + S&H.

I love the style of these numbers and they were so easy to install.


And then added a basket with a "Summer Welcome". Just in time for Summer.


And here is the before and after...


Another project done!

Thanks for stopping by, Would love to hear from you!

Holly





9 comments:

  1. Your door looks fabulous! Now you need to come over and help me do mine. ;)

    Sandy
    Cherished Handmade Treasures

    ReplyDelete
    Replies
    1. Sure, but yours is not ugly like mine was.

      Holly

      Delete
  2. What a great job - I loved looking at all the photo steps you did. I enjoyed your honesty about how things can go wrong and how you fixed it!

    ReplyDelete
    Replies
    1. Thanks Karima, It's always a learning process for me.

      Holly

      Delete
  3. That sure does look amazing! Your patience paid off!

    Thanks for linking up to Say G'day Saturday. This week's post is now live so I hope that you can join in again this weekend!

    Best wishes,
    Natasha in Oz

    PS I'm going to Google+ this post right now!

    ReplyDelete
  4. Great work on the makeover! The door looks fantastic!

    ReplyDelete
  5. Hello Lovely, what a lovely blog. I'm your newest follower from Blog Hop. Followed you via Linky followers & GFC.
    Feel free to visit, follow and leave me comments @www.revampspunkyrena.com
    xoxo
    Rena

    ReplyDelete
  6. You didn't change the color, but it's not hard to sense that there's something new with your door. Why did you opt to stick with the same paint? Still, I'd like to congratulate you for a job well done! It takes a lot of effort to do a door makeover like this.

    -Danielle Bailey @ VinylumeInc.

    ReplyDelete
    Replies
    1. Hi Danielle,
      Thanks!
      I like the clean white and wanted the new hardware and address decal to pop. I think getting rid of all the brass made all the difference.

      Delete

Feel free to leave feedback




Related Posts Plugin for WordPress, Blogger...